Description

Kawasaki
H1 Air Filter Element - K&N
H1 1969-1975 & 1976 KH500A8

Fits in stock airbox. Washable/reusable filter comes pre oiled and ready to use. Increased air flow for improved performance. K&N #KA-1000
Made in USA.

Description

Kawasaki
H2 Air Filter Element - K&N
H2 1972-1975

Fits in stock airbox. Washable/reusable filter comes pre oiled and ready to use. Increased air flow for improved performance. K&N #KA-1100
Made in USA.

Description

Air Filter - K&N
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

#RC-1070
Made in USA.

KAWASAKI 1969-75 H1/A/B/C/D/E/F, 1976 KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S
YAMAHA 1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1984-85 RZ350
HONDA 1976-78 CB750 A Hondamatic, 1976-78 CB750 F Supersport, 1976-78 CB750 K Four

Description

Air Filter - Emgo
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

KAWASAKI 1969-75 H1/A/B/C/D/E/F, 1976 KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S
YAMAHA 1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1984-85 RZ350
HONDA 1976-78 CB750 A Hondamatic, 1976-78 CB750 F Supersport, 1976-78 CB750 K Four

Description

Uni Filter - Pod Filters
Individual 43-46mm Pod

43-46mm internal diameter

Sold only as a set of 2

Description

Uni Filter - Pod Filters
Individual 35-38mm Pod

35-38mm internal diameter

Sold only as a set of 2

Description

Kawasaki H2, H1, S, KZ, Z1
Master Cylinder Assembly
5/8" for Double Disk
Replaces OEM 43015-032

H1B/D/E/F, KH500, H2, H2A/B/C, S2A S3/A, KH400A3-A5, Z1, Z1A, Z1B, KZ900A4/A5, KZ650B1-B3 77-79, KZ400A1/A2/D/D3/D4
Replica master cylinder, painted rather then anodized.

Description

Kawasaki
Master Cylinder Rebuild Kit
H2/A/B/C, H1B, H1D/E/F, KH500, KZ650B1, Z1/A/B, KZ900A4/A5, KZ400A1, KZ400A1/A2, KZ400/D/D3/D4, KH400A3/A4, S3/S3A, KH400, S2A, KZ650-B1, KZ1000-A1

Contains all components to rebuild one OEM master cylinder. Made in Japan.

Description

Brake Hose 3/8" Crush Washers
Package of 10

Goodridge Brake Hose 3/8" Crush Washers (10 pack)

Description

Kawasaki H2, H1, KZ, Z1
Brake Hose Bracket Right Side
H1B, H1D, H1E, H1F, KH400 A8, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ1000A1-4 77-80, KZ200A1-2 78-79, KZ650B1-3 77-79, KZ750B1-4 76-79

Use with optional dual disc setup.
Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H2, H1, KZ, Z1
Brake Hose Bracket Right Side
H1B, H1D, H1E, H1F, KH500 A8, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ1000A1-4 77-80, KZ200A1-2 78-79, KZ650B1-3 77-79, KZ750B1-4 76-79

Use with optional dual disc setup.
Quality Reproduction. Replaces OEM part 43063-003 or 43064-001
includes grommet

Description

Kawasaki H2, H1, KZ, Z1
Brake Hose Bracket Left Side
H1B, H1D, H1E, H1F, KH500 A8, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ1000A1-4 77-80, KZ200A1-2 78-79, KZ650B1-3 77-79, KZ750B1-4 76-79

Quality Reproduction. Replaces OEM part 43063-001 or 43064-001
includes grommet

Description

Kawasaki H2, H1, KZ, Z1, S
Caliper Bleed Nipple Assembly
H1B//D/E/F, KH500, H2/A/B/C, S2A, S3, KH400, Z1/A/B, KZ900, KZ1000 (thru 1980), KZ1300, KZ400H, KZ440A, KZ440D, KZ550A, KZ550C, KZ650 (thru 1980), KZ750B, KZ750E, KZ750G, KZ750H
Geniune Kawasaki parts 43056-002 & 43057-002

Description

Kawasaki Z1, H1, H2
Double Disc 4-Way Joint Splitter
Z1, KZ900A4, H1B, H2, H2A, H2B, H2C

Needed to convert to a double disc front brake setup.
Replaces OEM part 43075-002 & 43075-001. Quality Reproduction made in Japan

Description

Kawasaki H2, H1, Z1, KZ
Front Brake Switch
H1B/D/E/F, KH500, H2/A/B/C, S2A, S3/A, KH400A3-A5, Z1, KZ900, KZ1000A/B/C/G, KZ400/A/B/D, KZ650B/C/D, KZ750B

Replaces OEM part 43065-001. Quality Reproduction made in Japan

Description

Kawasaki H2, H1, Z1
Caliper Bracket Right Side
H1B, H1D, H1E, H1F, H2, H2A, H2B, H2C, Z1

Right Hand Caliper Bracket. Used to turn a left hand caliper into a right hand caliper.

Replaces OEM part 43044-004. Quality Reproduction made in Japan

Description

Kawasaki Z1 & H2 Front Brake Pads - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

Description

Kawasaki H1, KZ, & KH Front Brake Pads - Vesrah
Models listed below

OEM replacement by Vesrah

Description

Kawasaki Z1 & H2 Rear Brake Shoes - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

Description

Kawasaki S1, S2, S3 KH & KZ400 Rear Brake Shoes - Vesrah
KH250, S1A/B/C, S2/A, KH400, S3/A, KZ400A1/A2/D/D3/D4/S/S2/S3

OEM replacement by Vesrah

Vesrah #VB-404

Description

Kawasaki H1, H2, S, Z1, ZL, ZX, EX, EN
Master Cylinder Dust Boot
Models listed below

Quality Reproduction
Replaces OEM part 43069-002

Correct ribbed design for Z1, H2, H1

Description

Kawasaki H1, H2, S, Z1, ZL, ZX, EX, EN
Master Cylinder Dust Boot
Models listed below

Geniune Kawasaki part.
Replaces OEM part 49006-1041 43069-001 49006-1008

Fits perfectly although a different finish from the early part number this replaces.

Description

Kawasaki H1, H2, S, KH, Z1, KZ
Front Brake Switch Cover
H1B/D/E/F H2/A/B/C KH400A3-A5 KH500-A8 KZ1000A/B/C/G KZ400/A/B/D KZ650B/C/D KZ750B KZ900 S2A S3/A Z1

Quality Reproduction made in Japan. Replaces OEM part 92073-027

Description

Kawasaki H1, H2, & S Series
Caliper Seal - Piston
H1B/C/D/E/F
H2/A/B/C
S2A, S3/A

Replaces OEM part 43053-001
Quality Reproduction

Description

12V Tail Light Bulb
Individual

12V/32/30
#1157 bulbs

Description

NGK BUHX spark plug
Surface Gap Plug

14mm thread size

Originally designed for the H1. Standard equipment on 1969 & 1970 H1.

Description

NGK BUHX spark plugs
Surface Gap Plugs
BOX OF 10

SAVE 10% when you buy a box of 10 BUHX plugs

14mm thread size

Originally designed for the H1. Standard equipment on 1969 & 1970 H1.

Description

NGK B8HS spark plug

14mm thread size

Description

NGK B8HS spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B8HS plugs

14mm thread size

Description

NGK B9HS spark plug

14mm thread size

Description

NGK B9HS spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B9HS plugs

14mm thread size

Description

NGK Spark Plug Cover
LZFH - Non Resistor Type

Thread Sizes: 10mm, 12mm& 14mm
Resistance: None
Configuration: 90† elbow

Description

NGK Spark Plug Resistor Cover
LD05F

Thread Sizes: 10mm & 12mm
Resistance: 5›
Configuration: 90† elbow

Description

NGK Spark Plug Resistor Cover
LB05FP

Thread Sizes: 14mm
Resistance: 5›
Configuration: 90† elbow

Special waterproof cover

Description

NGK Spark Plug Wire Splicer

Used for splicing new wires on old coils. Joins two sections of plug wire together.

Made from high impact plastic to provide a watertight connection.

Description

Spoke Wrench Set

2 piece set fits all 8, 9, 10, and 11 gauge spoke nipples.

Description

K&L Carb Cleaner Wire Set
Use for cleaning popular size jets and carb body holes/passages.

Spiral knurling on wires.

Made by K&L

Description

Rotor Puller
Kawasaki 69-71 H1 & H2 triples

Allows rotor to be removed easily and safely without risk of damage. A MUST for anyone working on a Kawasaki triple.

Description

Rotor Puller
Kawasaki S series triples

Allows rotor to be removed easily and safely without risk of damage. A MUST for anyone working on a Kawasaki triple.

Description

Piston Ring Installer
Handles piston rings from 3/64" to 1/4"

Easily install and remove piston rings without damage.

Made in USA

Description

Spring Hook (puller)
Use to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts.

Made in USA by Motion Pro

Description

Ignition Spark Tester
with adjustable spark gap

Provides instant diagnosis of ignition problems - whether a faulty coil or ignition wire. Adjustable gap measures spark stength from 0 to 40,000 volts. Works on motorcycles, cars, sleds etc.

Description

In-Line Spark Tester
For 6 or 12 volt systems

Attach black connector to spark plug and metal probe into spark plug cap. Crank engine over and light will flash if you have spark. Eliminates the need to remove plug to test for spark. Works on motorcycles, cars, sleds etc.

Description

Spark Plug Hole Thread Chaser
Cleans & repairs threads

For use on 14mm and 18mm threads. Tapered ends for easy starting. Works on motorcycles, cars, sleds etc.

Description

Motion Pro Cable Luber
Injects lubricant into cable housing

Save time. Avoid mess. Clamps over cable housing and wire. Allowis an aerosol can to be connected. When lube runs out of opposite end, the cable is lubricated.