Description

Kawasaki H1 & A Series
Reflector Set
H1, H1A, A1, A7 and other models

Replaces OEM part 28001-004
Quality Reproduction

Exact replica of original. Reflector diameter is 40mm. Includes brackets shown.

Description

Kawasaki H1, A1 & A7
Speedometer Bracket

Replaces OEM part 25008-009
Quality Reproduction made in Japan

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Correct 13mm bolt heads

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Handlebar 7/8" Chrome - Drag Bar

Width: 27.5"
Rise: 0"
Pullback: 3.75"
Center Width: 5"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Kawasaki H2, H1, S, KH, KZ
Shock Absorber Nuts
H1, H1A, H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400 & several KZ & F models

Geniune Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki H1, A1 & A7
Front Fender Screw Set
1969-1971 H1
1967-1971 A1 & A7

This 36 piece hardware kit includes all screws, washers and nuts to mount bracket and stays to front fender.
Zinc plated.

Description

Kawasaki H1, W1, A1 & A7 Turn Signal Set (set of 4)
69-71 H1, W1, A1, A7 and other pre 1971 models

These are exact reproductions in every detail. The best available!

Replaces OEM 23040-020. Lenses are genuine Kawasaki. Sold only as a set. Stems included.

Description

Kawasaki H1, W1, A1 & A7 Turn Signal Stems (set of 4)
69-71 H1, W1, A1, A7 and other pre 1971 models

Fits OEM 23040-020 turn signals. Sold only as a set.

High quality reproduction.

Description

Kawasaki H1, W1, A1 & A7 Turn Signal Lens
69-71 H1, W1, A1, A7 and other pre 1971 models

Geniune Kawasaki part.
Made in Japan.

Sold individually

Description

Kawasaki H1
Niiko Horn
H1, H1A & H1C

Replaces OEM part 27003-014

Chrome finish. Original mounting bracket must be reused.

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Kawasaki H1, A1, A7
Gas Cap - early twist on type
H1/A, A1, A7, W

Replica fuel cap. Same size and design as OEM cap. Does not have small hole on top.

Replaces OEM part 51049-008
Quality Reproduction made in Japan

Description

Genuine Kawasaki H1, A1 & A7 Fuel Front Tank Grommet Kit - Set of 2

PART# 92075-013
Geniune Kawasaki Part

For 1969-1972 H1, 1969-71 A1 & A7. Sold only as a set.

Description

Genuine Kawasaki H1, A1 & A7 Front Fuel Tank Spacer

Geniune Kawasaki Part. Part #92027-034 updated to 92027-1134.

For 1969-1972 H1, 1969-71 A1 & A7. Used on left side and fits into grommet 92075-013.

Description

Kawasaki H1, S, A & W
Side Stand Stopper Rubber

PART# 92075-031
Quality Reproduction

H1/A/B/C/D/E/F, KH500, A1, A7, W1, W2, KH250, S1, S2/A, S3/A, KH400

Description

Genuine Kawasaki Handlebar Damper Rubber - Set of 4

PART# 92075-039
Geniune Kawasaki Part

For H1/H1A/H1C, A1, A7, S1, KH250, S2/S2A, S3/S3A & KH400.
Sold only as a set.

Description

Kawasaki Handlebar Damper Rubber - Set of 4

PART# 92075-039
Quality Reproduction

For H1/H1A/H1C, A1, A7, S1, KH250, S2/S2A, S3/S3A & KH400.
Sold only as a set.

Description

Genuine Kawasaki Speedometer Seat Rubber - Set of 2

PART# 92075-035
Geniune Kawasaki Part

For 1969-1971 H1, 1969-71 A1 & A7. Sold only as a set.

Description

Kawasaki Speedometer Shock Damper - Set of 4

PART# 92075-034
Quality Reproduction

For 1969-1971 H1, 1969-71 A1 & A7
Sold only as a set.

Description

Kawasaki Speedometer Shock Damper - Set of 2

PART# 92075-024
Quality Reproduction

For 1969-1971 H1, 1969-71 A1 & A7, F5, F9 & G4.
Sold only as a set.

Description

Kawasaki H2, Z1, KZ, A, W
Headlight Shell Rubber Plug
Models - listed below

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki Rear Footrest Rubber - Set of 2

Replaces OEM part 92076-009
Quality Reproduction

For 1969-1971 H1, 1969-71 A1 & A7. Sold only as a set.

Description

Genuine Kawasaki Shifter Rubber

PART# 13157-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki Brake Rod Pin
H1B, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900, KZ750, KZ550, KZ400, KZ305 & other models

Larger of the two Brake Rod Pins and for most bikes its at BACK end of the Rod.

Geniune Kawasaki part.

Description

Brake Rod Pin & Adjuster Set
H1, A1, A7 and other models with cable operated drum brakes

Larger of the two Brake Rod Pins #92043-065. Use with cable operated drum brakes on front or rear.

Geniune Kawasaki parts

Description

Kawasaki H1 Replica Mirror
(clamp on)

1969 H1, 1970 H1, 1971 H1A & W1

Replaces OEM: 56001-005
Quality Reproduction

Description

4" Universal Chrome Mirror
10mm screw-in with 8" stem
Fits RH or LH side

Universal fit for many makes and models.
Designed as a CB750 K0 replica but will fit any 10mm right hand thread mount.

Description

Kawasaki H2, H1, S1, S3, KH
Bolt - 6X12
H1, H2, KH500, KH400, S1, KH250, S3
Used on fenders, mufflers, ignition, frame and various locations where bolt with "7" is required.

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H2, H1, S1, S3, KH
Bolt - 6X18
H1, H2, KH500, KH400, S1, KH250, S3
Used on fenders, mufflers, ignition, frame and various locations where bolt with "7" is required.

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H2, H1, S1, S3, KH
Bolt - 8X18
H1, H2, KH500, KH400, S1, KH250, S3
Used on fenders, mufflers, ignition, frame and various locations where bolt with "7" is required.

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H2, H1, S1, S3, KH
Bolt - 6X60
Used on various locations where bolt with "7" is required.

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H2, H1, S1, S3, KH
Bolt - 6X25
Used on various locations where bolt with "4" is required.

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki H1
Bolt - 8X55
H1, H1A
Used on rear fender & optional rear turn signal

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Spring Hook (puller)
Use to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts.

Made in USA by Motion Pro