Description

Kawasaki Z1 Seat Assembly - Complete
1973-1975 Z1, Z1A & Z1B

Replica Z1 seat sold as a complete unit with hinges, latch post & rubber dampers. Back of seat is slightly more square than the original.

Description

Kawasaki Z1 Seat Strap Assembly
1973-1975 Z1, Z1A & Z1B

Replica Z1 seat strap with buckles.

Description

Kawasaki Seat Strap Kit - Universal
Z1 & KZ models

Replica Z1 and KZ seat strap with buckles. Universal to fit your seat. Great for custom seats.

Description

Kawasaki Z1
Seat Stopper & Hardware
Z1, Z1A, Z1B 1972-75

Replica of OEM 53054-001, 53055-001 & 92041-003. Reproduction

Description

Kawasaki Z1 - Seat Catch Lever
1973-75 Z1

Stainless steel replica.

Reproduction of OEM 53052-001

Description

Kawasaki Chrome Grab Rail - Z1, KZ900, KZ1000
1973-1975 Z1, 1976 KZ900, 1977-1978 KZ1000 (except shaft models)

Excellent replica of OEM 35032-022. Will also fit the LTD model but sits lower due to the higher LTD seat.

Description

Kawasaki KZ1000 Grab Handle
KZ1000A3, KZ1000A4 KZ1000D Z1-R & also fits Z1, KZ900 & other KZ1000's up to 1980

Replica of OEM 32109-1004

Description

Kawasaki Z1, Z1A Fork Cover - Left Hand
1973 Z1, 1974 Z1A

OEM 44033-046. Early seamless Z1 & Z1A fork ears.

Description

Kawasaki Z1, Z1A Fork Cover - Right Hand
1973 Z1, 1974 Z1A

OEM 44034-046. Early seamless Z1 & Z1A fork ears.

Description

Kawasaki Z1, KZ900, KZ1000 Fork Cover - Left Hand
1975 Z1B, 1976 KZ900, 1977-80 KZ1000

OEM 44033-072. Later version Z1B fork ears.

Description

Kawasaki Z1, KZ900, KZ1000 Fork Cover - Right Hand
1975 Z1B, 1976 KZ900, 1977-80 KZ1000

OEM 44034-072. Later version Z1B fork ears.

Description

Kawasaki H2, H1, Z1
Steering Damper

Identical to original Kawasaki steering Damper 46117-006. Variable force, oil-filled hydraulic steering damper. Seven-point adjustment range. Brackets are not included.

Quality Reproduction made in Japan by RC Engineering.

Description

Kawasaki Z1, KZ900, KZ1000 Gear Change Lever - Reproduction
Z1, KZ900, KZ750B, KZ1000A, KZ1000B, KZ1000D, KZ1000G, KZ1000J, KZ1000K, KZ1000M.

Chrome finish. Includes bolt & rubber. Replaces OEM 13242-006

Description

Kawasaki Z1, Z2
Tail - ABS Plastic
Z1, Z1A, Z1B 1972-75

Excellent copy of the orignal made from ABS plastic.

Quality Reproduction made in Japan.

Description

Kawasaki Z1
Side Cover - Left
1972-75 Z1, Z1A, Z1B
ABS Plastic ready to paint

Quality Reproduction. Can be drilled for side panel emblems using marks on the inside.

Description

Kawasaki Z1
Side Cover - Right
1972-75 Z1, Z1A, Z1B
ABS Plastic ready to paint

Quality Reproduction. Can be drilled for side panel emblems using marks on the inside.

Description

Kawasaki KZ900 & KZ1000
Side Panel Left
KZ900A4 1976, KZ900B LTD 1976, Z1000A1 1977, Z1000A2 1978, KZ1000B LTD 1977-80

Quality Reproduction made from plastic

Holes for badge must be drilled.

Description

Kawasaki KZ900
Side Panel Right
KZ900A4 1976, KZ900B LTD 1976

Quality Reproduction made from plastic

Holes for badge must be drilled.

Description

Kawasaki Z1, Z1A - Side Panel Badge - Reproduction
Quality metal adhesive backed (stick on) badges.

Image shows front & back of emblem. Replaces OEM 56018-148 & 56018-139

Description

Kawasaki Z1 - Inner Rear Fender
1973-75 Z1

ABS plastic inner rear fender.

Reproduction of OEM 35022-071

Description

Kawasaki Z1, KZ900, KZ1000 - Engine Case Guards
1973-75 Z1/A/B, 1976 KZ900A4/A5/B1, 1977-80 KZ1000A1/A2/A3/A4 KZ1000B1/B2/B3/B4, 1978-81 KZ1000C1/C2/C3/C4 KZ1000D1/D2/D3 KZ1000E1/E2 KZ1000G1
3 point chrome engine case guards.

Description

Kawasaki Z1, KZ900, KZ1000 - Front Footrest Assemblies
Z1/A/B, KZ900, 1977-80 KZ1000A1-A4/B1-B4/D1/D3/G1
Front foot rest assemblies include mounting brackets, foot rest bars, and rubber dampers.
Replaces OEM part 34028-011 & 34028-012

Description

Kawasaki Z1, H1, KZ Footrest Rubber Set - Reproduction
H1D/E/F, KH500, S2A, S3/A, KH400, S1, KH250, Z1, KZ900, KZ1000A1-A4, KZ1000B1-B4, KZ1000D1/D3/G1
Replaces OEM: 34028-011 & 34028-012

Description

Kawasaki Z1, KZ900, KZ1000 Footrest Bar Dampers - Reproduction
Z1/A/B, KZ900A4/A5/B1, KZ1000A1-A4, KZ1000B1-B4, KZ1000D1/D3/G1, KZ750K1/K2/M1

Replaces OEM 92075-140

Description

Kawasaki Z1, KZ Footrest Bar Cap & Nut - Reproduction
Z1/A/B, Z2, KZ900A4/A5, KZ1000A/B/D/E/G, KZ650B/C/D/E/F/H, KZ750B/E/G/H/K/M

Stainless Steel. Includes acorn bolts & caps. Replaces OEM 92019-013 & 92102-010

Description

Kawasaki Z1, KZ900, KZ1000 - Rear Footrest Assemblies
1972-75 Z1/A/B, 1976 KZ900, KZ1000B1/B2/B3B4/G1

Quality Reproduction with recessed chrome end. Can fit H1D, H2/A/B/C, S2A & S1A if longer bracket 34029-008 (not included) is used. OEM 34028-009, 92076-024, 92022-199, 92043-1464, 550D2012, 33028-011
Sold only as a set.

Description

Kawasaki Z1, KZ & others
Shock Absorber Nuts -12mm
Models listed below

Genuine Kawasaki part.
Made in Japan.

Sold only as a pair.

Z1, Z1A, Z1B, KZ900, KZ1000A1-A4, KZ1000B1-B4, KZ1000C1-C4, KZ1000P1-P19, KZ1000 J1-J3, KZ1000 M1-M2, KZ1000 A1-A3, KZ1000 K1-K2, KZ1000 E2, KZ1100 A1-A3, KZ1100 B1-B2, KZ1100 L1, ZN1300 A1-A6, ZG1300 A1-A6, ZR1100 C1-C4, ZR1100 D1-D4, ZRX1100 C1-C4, ZRX1100 D1-D4, KZ750 E1-E3, KZ750 H1-H4, KZ750K1-K2, KZ750-M1, KZ650 B1-B3, KZ650 C1-C3, KZ650D1-D2, KZ650 E1, KZ650 F1, KZ650 H1-H3, C2SS, C2TR, G3SS, G3TR, G5, MC1, KD80, KD100, KE100, KH100, KH125, KM100, KC100 and other models using 12mm shock absorber nuts.

Description

Kawasaki Z1 License Plate Damper - Reproduction
Z1, Z1A, Z1B, KZ900B1

Replaces OEM 92075-176

Description

Kawasaki Z1 & KZ
Rear Shock Absorber Hardware Set

Includes all shock nuts, bolts and washers.

Quality Reproduction made in Japan

Description

Kawasaki H2, H1, S, KH, KZ
Shock Absorber Nuts - 10mm
H1, H1A, H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400 & several KZ & F models

Genuine Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki Triples, Z1, KZ & others
Shock Absorber Bolts -10 X 35mm
Models listed below

Genuine Kawasaki part.
Supercedes 113N1035
Made in Japan.

Sold only as a pair.

Description

Kawasaki KZ, KH
Locking Gas Cap
Models Listed below

Replica fuel cap includes latch and 1 roll pin & 2 keys.

Replaces OEM part 51048-012
Quality Reproduction for 1976 onward

KH250, KH400, KH500 A8, KZ900 A4, KZ900 LTD, KZ1000 LTD, KZ1000 A1, KZ1000 A2, KZ1000 A2A, KZ1000 B, KZ1000 G1, KZ200 A1, KZ200 A1A, KZ200 A2, KZ400, KZ400 A1, KZ400 A2, KZ400 D3, KZ400 D4, KZ400 S, KZ650 B, KZ650 C, KZ650 F1, KZ750 B, KZ750 G1

Description

Kawasaki H2, H1, Z1, S1, S3
Gas Cap
H2B/C, H1D/E/F, S1B/C, S3/A, Z1

Replica fuel cap includes latch and 2 pins.

Replaces OEM part 51048-007
Quality Reproduction made in Japan

Description

Kawasaki KZ
Fuel Cap - Locking
KZ1000 MkII, KZ1000J/R, KZ1300

Quality Reproduction. Includes rubber gasket and 2 keys.

Description

Kawasaki H2, H1, Z1, S1, S3
Gas Cap Gasket
H2B/C, H1D/E/F, S1B/C, S3/A, Z1

Geniune Kawasaki part.
Made in Japan.
Sold individually

Description

Kawasaki H2, H1, KZ, S
Steering Stem Bolt & Washer
H1D, H1E, H1F, KH500, H2, H2B, H2C, S1C, KH250, S3, S3A, KH400, KZ1300, KZ1000, Z1, KZ400, KZ550, KZ750 & several other models

Geniune Kawasaki part.
Made in Japan.
Sold only as a set

Description

Kawasaki H1, H2, KZ & others
Chrome Bolts - Upper Steering Stem Clamp - 8 X 35mm
Holds fork legs

Genuine Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki Z1, KZ & H2
Chrome Bolt Set - Lower Steering Stem Clamp

12mm X 36mm bolts with 18mm hex head & washers

Quality Reproduction made in Japan

Description

Kawasaki Z1, KZ, H2B/C, H1, S
Chrome Bolt Set - Upper Steering Stem Clamp

Includes:
8mm X 56mm & 8mm X 45mm bolts, washer & acorn nut

Quality Reproduction made in Japan

Description

Kawasaki Z1, KZ, H2, H1, S
Steering Stem Bolt & Washers
H1D, H1E, H1F, KH500, H2, H2B, H2C, S1C, KH250, S3, S3A, KH400, KZ1300, KZ1000, Z1, KZ400, KZ550, KZ750 & several other models

Quality Reproduction made in Japan

Description

Kawasaki Z1, KZ, H2, H1, S
Stainless Steel Upper & Lower Steering Stem Hardware Set

H1D, H1E, H1F, KH500, H2B, H2C, S1C, KH250, S3, S3A, KH400, KZ1300, KZ1000, Z1, KZ400, KZ550, KZ750 & several other models.

Description

Kawasaki Triples, Z1, KZ
Steering Stem Nut & Cap Set - Chrome Plated
H2, H1, S1, S2, S3, KH, Z1, KZ900

Replaces OEM part 92090-007 & 46098-010,
Quality Reproduction

Original parts were zinc plated.

Description

Kawasaki H2, H1, KZ, Z1
Fork Caps
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ750B

Quality Reproduction made in Japan.
Sold only as a set

Description

Kawasaki Z1
Fork Cover -Lower Chrome
Z1, Z1A, Z1B

Also fits H1D, H1E, H1F, KH500 A8 but does not have mount for reflector

Quality Reproduction made in Japan. Replaces OEM part 44064-006. Sold only as a set

Description

Kawasaki Z1, KZ
Fork Cover Guide Washer
Z1, Z1A, Z1B. KZ900A4/A5, KZ1000A, KZ650B/C/F, KZ750B

Quality Reproduction made in Japan. Replaces OEM part 44064-008. Sold only as a set

Description

Kawasaki Z1, KZ
Fork Cover -Top Chrome Trim Rings
Z1, Z1A, Z1B. KZ900A4/A5, KZ1000A, KZ650B/C/F, KZ750B

Quality Reproduction made in Japan. Replaces OEM part 44064-005. Sold only as a set

Description

Kawasaki H2, H1, KZ, Z1
Fork Cover - O-rings
H1E, H1F, KH500 A8, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5, KZ1000A, KZ650B/C/F, KZ550F/M, KZ750B

Quality Reproduction made in Japan. Replaces OEM part 44064-038. Sold only as a set

Description

Kawasaki Z1, KZ900 & KZ1000 - Engine Mounting Bolt Set
1973-75 Z1, 1976 KZ900, 1977-78 KZ1000

Set of zinc plated steel engine mounting bolts, washers, nuts and spacers for the KZ900 & KZ1000 models.

Description

Kawasaki Z1, KZ Chain Gaurd Bolt Set - Reproduction
Z1, KZ900, KZ1000

Stainless Steel. Replaces OEM 11ON0618, 92001-115, 92022-125, 92022-195

Description

Kawasaki Z1, KZ900. KZ1000 Chain Gaurd Gaurd - Reproduction
Z1, KZ900A4/A5, KZ1000A1/A2/A3/A4, KZ1000C1/C2/C3/C4

Replaces OEM 36014-045

Description

Kawasaki Z1, KZ - 15T Countershaft Sprocket
For use with 630 chain
Models listed below

Replaces OEM 13144-062

Description

Kawasaki Z1, H2, H1
Clutch Lever Assembly
1972-75 Z1, 1972-75 H2, 1972-75 H1, 1973 S2A, 1974-75 S3 & S3A

Quality Reproduction set that we have assembled. Replaces 46094-011-21, 6092-005, 92007-020, 112N0625. No cable adjuster included.

Description

Kawasaki Z1, H2, H1
Clutch Cable Adjuster
Z1, KZ, H2, H1 and many others. Universal fit for many other metric models.

Replaces OEM 46056-007 & 46055-003

Description

Kawasaki Z1, H2, H1
Clutch Lever Mount
1972-75 Z1, 1972-75 H2, 1972-75 H1, 1973 S2A, 1974-75 S3 & S3A

Quality Reproduction made in Japan. Replaces 46094-011-21

Description

Kawasaki Z1, KZ900 Handlebar Switch

Later KZ900 style but works and fits on the Z1.

Functions: headlight on-off, starter button and kill switch.

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Correct 13mm bolt heads

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Kawasaki H2, H1, KZ, Z1
Brake Hose Bracket Right Side
H1B, H1D, H1E, H1F, KH500 A8, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ1000A1-4 77-80, KZ200A1-2 78-79, KZ650B1-3 77-79, KZ750B1-4 76-79

Use with optional dual disc setup.
Quality Reproduction. Replaces OEM part 43063-003 or 43064-001
includes grommet

Description

Kawasaki H2, H1, KZ, Z1
Brake Hose Bracket Left Side
H1B, H1D, H1E, H1F, KH500 A8, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900A4/A5/B1, KZ1000A1-4 77-80, KZ200A1-2 78-79, KZ650B1-3 77-79, KZ750B1-4 76-79

Quality Reproduction. Replaces OEM part 43063-001 or 43064-001
includes grommet

Description

Kawasaki H2, H1, KZ, Z1, S
Caliper Bleed Nipple Assembly
H1B//D/E/F, KH500, H2/A/B/C, S2A, S3, KH400, Z1/A/B, KZ900, KZ1000 (thru 1980), KZ1300, KZ400H, KZ440A, KZ440D, KZ550A, KZ550C, KZ650 (thru 1980), KZ750B, KZ750E, KZ750G, KZ750H
Geniune Kawasaki parts 43056-002 & 43057-002

Description

Brake Bleeder Rubber Cap

Fits most caliper bleed nipples.

Description

Kawasaki Z1, H1, H2
Double Disc 4-Way Joint Splitter
Z1, KZ900A4, H1B, H2, H2A, H2B, H2C

Needed to convert to a double disc front brake setup.
Replaces OEM part 43075-002 & 43075-001. Quality Reproduction made in Japan

Description

Kawasaki H2, S, KH, Z1, KZ
FlasherRelay
H2B/C, KH400A3-A5, S3/S3A, S2A, S1A/S1B/S1C, KH250, Z1/Z1A/Z1B, KZ900A4/A5, KZ900B1 LTD, KZ1000 77-83, KZ1100 81-83, KZ1300A 79-82

Replaces OEM part 27002-011

Description

Kawasaki H2, H1, Z1, KZ
Front Brake Switch
H1B/D/E/F, KH500, H2/A/B/C, S2A, S3/A, KH400A3-A5, Z1, KZ900, KZ1000A/B/C/G, KZ400/A/B/D, KZ650B/C/D, KZ750B

Replaces OEM part 43065-001. Quality Reproduction made in Japan

Description

Kawasaki H1, H2, S, KH, Z1, KZ
Front Brake Switch Cover
H1B/D/E/F H2/A/B/C KH400A3-A5 KH500-A8 KZ1000A/B/C/G KZ400/A/B/D KZ650B/C/D KZ750B KZ900 S2A S3/A Z1

Quality Reproduction made in Japan. Replaces OEM part 92073-027

Description

Kawasaki KZ
Rear Brake Switch
Fits Kawasaki KZ1000A1-A4/B1-B4/C1/C2/D1/D3/G1 KZ900 KZ650B1-B3/C1-C3/D1/D2/E1/F1 KZ550A1-A4/C1-C4

Also fits H1, H2, Z1 and many other
models.

Description

Kawasaki Z1, KZ900, KZ1000 Rear Brake Switch Hardware - Reproduction
Z1, KZ900, KZ1000.

Includes 1 Spring, 1 Brake Lamp Switch Hook and 2 Pins. Replaces OEM 27011-009, 27012-010, 550D1610

Description

Kawasaki Z1, KZ
Spring - Rear Brake Pedal
KZ1000B1/B2/B3/B4, KZ900A4/A5, Z1, Z1A, Z1B

Quality Reproduction. Rear brake pedal spring.

Description

Kawasaki KZ1000 - Spring - Rear Brake Pedal
Z1-R, KZ1000A3A/A4, KZ1000B4, KZ1000D1/D3, KZ1000G1

Reproduction of OEM 92081-1046

Description

Kawasaki Z1 & KZ900 Rear Brake Pedal
Z1 1973, Z1A 1974, Z1B 1975, KZ900A4 & KZ900A5

Reproduction Z1 & KZ900A4/A5 rear brake pedal OEM 43001-044. Very nice chrome replica of the original part.

Description

Kawasaki H2, H1, Z1
Caliper Bracket Right Side
H1D, H1E, H1F, H2, H2A, H2B, H2C, Z1

Right Hand Caliper Bracket. Used to turn a left hand caliper into a right hand caliper.

Replaces OEM part 43044-004. Quality Reproduction made in Japan

Description

Kawasaki H2, H1, S1, S2, S3 KZ, Z1 & Yamaha XS TX
Swingarm Bushings (pair) Bronze
Models listed below

Replaces OEM part Kaw 33033-009 & Yam 90386-22029-00

Description

Kawasaki H2, H1, KZ, Z1
Swingarm Locking Nut Chrome
H1, H2, KH500, KV75, KZ1000 (all except ELR & shaft models), KZ1100B, KZ650, KZ750B, KZ750E, KZ750G, KZ750H, KZ750K, KZ750M, KZ900, MT1, Z1, ZX1100A

Geniune Kawasaki part.

Description

Kawasaki H2, H1, KZ, Z1, ZL, ZX
Rear Axle Castle Nut 18mm
Models listed below

These are not polished chrome like the early version - they have a rough cast finish.

Geniune Kawasaki part. 42045-018 or 92015-1441

Description

Kawasaki H2, H1, KZ, Z1, ZL, ZX
Rear Axle Castle Nut & Pin 18mm
Models listed below

Bright zinc plated

Quality Reproduction of 42045-018 or 92015-1441

Description

Kawasaki Z1, H2
Spacer - Rear Hub
1972-75 Z1/A/B, 1972-75 H2/A/B/C
Stainless steel

Quality Reproduction. Replaces OEM 42010-021

Description

Kawasaki Z1, H2, H1
Spacer - Front Hub
1972-75 Z1/A/B, 1972-75 H2/A/B/C, 1972-75 H1D/E/F
Stainless steel

Quality Reproduction. Replaces OEM 41039-019

Description

Kawasaki Shock Absorber Rubber Bushing (set of 2)
A1, A7, F9/A/B/C, H1/A/B/C/D/E/F, KH500A8, H2/A/B/C, KH250A5, S1A/B/C, S2/A, S3/A, KH400A3/A4/A5, Z1/A/B, KZ900A4/A5/B1, W1, W2
Updated replica of OEM 45017-001

Description

Kawasaki Z1, H2, H1 Washer & Cotter Pins - Brake Shoe
Z1, KZ900, H2, H1D/E/F, KH500

Replica of OEM 41045-006 & 550D3025

Description

Kawasaki Z1 KZ900
Replica 7/8" Handlebars
Z1, Z1A, Z1B, KZ900

Aftermarket copy of the Kawasaki Z1 bars - correctly spaced serrations on the center mount area. Drilled on the RH side. Width 32" Rise 5" Pullback 7"

Description

Handlebar 7/8" Chrome - European Bar

Width: 29.5"
Rise: 2"
Pullback: 5.5"
Center Width: 4.5"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Handlebar 7/8" Chrome - Superbike Bar

Width: 29"
Rise: 2.5"
Pullback: 4.75"
Center Width: 4.75"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

$24.99 USD plus shipping
Contact us for shipping cost
parts@reproductiondecals.com

Description

Handlebar 7/8" Chrome - Drag Bar

Width: 27.5"
Rise: 0"
Pullback: 3.75"
Center Width: 8"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Kawasaki
Hand Grip Set
H1B/D/E/F, H2/A/B/C, S1/A/B/C, S2/A, S3/A, KH250, KH400, KZ400 Z1, F5, F6, F7, F8, F9, G3, G4

Geniune Kawasaki part.
Made in Japan.

OEM part numbers 46061-012 & 46075-017

Description

Kawasaki
Hand Grip Set
H1B/D/E/F, H2/A/B/C, S1/A/B/C, S2/A, S3/A, KH250, KH400, KZ400 Z1, F5, F6, F7, F8, F9, G3, G4

Quality Reproduction made in Japan.
Replaces OEM 46061-012 & 46075-017

Description

Kawasaki Z1, KZ900, KZ1000, H2 Cable Clamp - Reproduction
Z1, KZ900, KZ1000A1-4/B1-B4/C1-C4/G1 1977-81, KZ200, KZ400, KZ650B/C/D, KZ750B1-B4/K1-K2/M1, H2B, H2C

Stainless Steel & Rubber. Replaces OEM 92037-092

Description

Kawasaki Z1, KZ
Clutch Cable Clip
KZ900, Z1, KZ1000, KZ1100, KZ1300, KZ200, KZ250, KZ650, KZ700, KZ750,VN700, VN750, ZN1100, ZN1300

Quality Reproduction. Replaces OEM 92037-093

Description

Kawasaki Z1
Damper - Rear Fender
1972-75 Z1/A/B, 1976 KZ900, 1977-78 KZ1000 A1-A2

Quality Reproduction. Replaces OEM 92075-135

Description

Kawasaki Z1 & KZ900
Battery & Oil Tank Band
Z1, Z1A, Z1B, KZ900A4

Genuine Kawasaki part #92072-045

EJ650A2-3 (W650) 2000-01 EX2508F 2008 KH125 2000 KH125 2003 KH125 2004 KH250A5 1976 KH400A3-5 1976-78 KL650 1987-2008 KLXA1-2 1979-80 KLX650C1-4 1993-96 KZ400 1974 KZ400D/D3/D4 1975-77 KZ400S/S2/S3 1975-77 S1/A/B/C 1975-75 S3/A 1974-75 VN1500P1-2 2002-03 VN1600A1-8/B1-8/D1-8 2003-08 VN1600E6F/F6F/G6F 2006 Z1 1973-75 ZX1100C1-4 1990-93 ZX600G1-2 1998-99 ZX600J1-4 2000-05 ZX600J6F/J7F/J8F 2006-08

Description

Kawasaki Handlebar Damper Rubber - Set of 4

PART# 92075-092
Quality Reproduction

For H2, H2A, H2B, H2C, Z1
Sold only as a set.

Description

Kawasaki H1, KZ, Z1
Muffler Main Stand Damper
KZ200 KZ250 KZ305 KZ400 KZ440 KZ550 KZ650 KZ700 KZ750 KZ900 KZ1000 KZ1100 KZ1300 EX250 EX305 EX500 H1D H1E H1F KH500 W1 W2 ZG1200 ZN1300 ZR750 ZX1000 ZX1100 ZX600 ZX750 ZX900 Z1
Geniune Kawasaki part.

Description

Kawasaki KZ1000
Side Stand Stopper Rubber
KZ1000, H1/A/B/C/D/E/F, KH500, A1, A7, W1, W2, KH250, S1, S2/A, S3/A, KH400 and other models

PART# 92075-031
Quality Reproduction

Description

Kawasaki Z1, KZ
Side Stand Hardware
Z1/A/B, KZ900, KZ1000

Quality Reproduction. Replaces OEM 34025-005, 92003-079, 315B1200A

Description

Kawasaki
Grommet - Side Panel
KZ1000, KZ1100, KZ1300, KZ200, KZ250, KZ305, KZ400, KZ440, KZ550, KZ650, KZ750, KZ900

KZ1000D1 & D3 (4 of this grommet needed)
Z1 (4 of this grommet needed)

Sold individually.

Description

Kawasaki
Grommet - Side Panel
Z1, Z1A, Z1B, KZ900, KZ1000D1, KZ1000D3

KZ1000D1 & D3 (2 of this grommet needed)
Z1 (1 of this grommet needed)

Sold individually.

Description

Kawasaki
Side Panel Grommet Set
Z1, Z1A, Z1B, KZ900, KZ1000D1, KZ1000D3, KZ1000, KZ1100, KZ1300, KZ200, KZ250, KZ305, KZ400, KZ440, KZ550, KZ650, KZ750, KZ900

Quality Reproduction.
Replaces OEM 92071-056 & 92071-064

Description

Kawasaki H2, Z1, KZ, A, W
Headlight Shell Rubber Plug
Models - listed below

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki Z1 Gauge Bracket
Replica Gauge Bracket includes mounting hardware & dampers

Replica of OEM 25008-025, 25008-036 & 25008-044

Description

Kawasaki Z1, KZ
Gauge Mount Damper Set
20 piece set
Models listed below

Quality Reproduction made in Japan. Replaces 92027-211, 92075-172, 92022-241, 461F0500, 312B0500A

Sold only as a set.

Description

Kawasaki H1, H2, Z1
Rear Fender/Tail Hardware

1973-75 H1D/E/F, 1972-75 H2/A/B/C, 1976 KH250A5, 1976 KH500A8 1974-75 KZ400/D, 1973-75 S1/A/B/C 1973-74 S3/A, 1973-75 Z1A/B

This 20 piece hardware kit.

Description

Kawasaki Z1, KZ900
Tail Light Hardware
Z1, Z1A, Z1B, KZ900A4

Quality reproduction 16 piece hardware kit. OEM 35039-004, 116B0625, 461 F0600, 92027-156, 92075-121

Description

Kawasaki Z1, Z2
Rear Fender Mounting Rubber Damper Set
Z1, Z1A, Z1B, KZ900A4

Quality reproduction 14 piece hardware kit. OEM 110B0632, 461F0600, 92022-228, 92075-121, 92027-162, 92075-133, 92022-227

Description

Kawasaki Z1, Z2
Electric Plate Damper Set
Z1, Z1A, Z1B

All 11 dampers and collars for the Electro plate on Z1 models. (rectifier/starter switch)

Quality reproduction made in Japan.

Description

Kawasaki Z1, Z2
Battery Case Mounting Rubber Damper Set
Z1, Z1A, Z1B

Quality reproduction 14 piece hardware kit. OEM 110B0632, 461F0600, 92022-228, 92075-121, 92027-162, 92075-133, 92022-227

Description

Kawasaki Z1-R
Tail Hardware Set

KZ1000 D1 & D3 Z1-R, KZ1000 MkII,

Quality Reproduction made in Japan.

12 piece hardware kit.

Description

Kawasaki KZ900 & KZ1000
Battery Box Mounting Hardware

KZ1000A1-A4/B1-B4 1977-80, KZ1000C1-C4 1987-81, KZ900

This 26 piece hardware kit.

Description

Kawasaki
Steering Stem Bearing Set
Models - listed below

Upper: 30 x 48 x 14mm
Lower: 30 x 52 x 17mm

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

EL250B2/B3 Eliminator 88-89, EL250E1/E2/E3 250Hs Eliminator 91-93, EX250E1/E2 Ninja 250R 86-87, EX250F6-F19 Ninja 250R 92-05, EX250F6F Ninja 250R 2006, EX500A1-A7 87-93, EX500D1/D2/D3 Ninja 500 94-96, EX500D4-D12 Ninja 500 97-05, EX500D7F Ninja 500R 06-07, KZ550A1/A2/A3/A4 80-83, KZ550C1/C2/C3/C4 LTD 80-83, KZ550D1 GPz 1981, KZ650B1/B2/B2A/B3 77-79, KZ650C1/C2/C3 Custom 77-79, KZ6650D1/D1A/D2 SR 78-79, KZ650E1/F1 1980, KZ650H1/H2/H3 CSR 81-83, KZ750B1/B2 (2 cylinder) 76-77, KZ750B3/B4 (2 cylinder) 78-79, KZ750E1/E2/E3 80-82, KZ750G1 LTD (2 cylinder) 1980, KZ750H1/H2/H3/H4 LTD 80-83, KZ750K1/K2 LTD (2 cylinder) 83-84, KZ750M1 CSR (2 cylinder) 1982, Z1/A/B 900 73-75, KZ900A4/A5 76-77, KZ900B1 LTD 1976, KZ1000A1/A2/A2A 77-78, KZ1000A3/A3A/A4 MKII 79-80, KZ1000B1/B2/B3/B4 LTD 77-80, KZ1000C1/C1A/C2/C3/C4 Police 78-81, KZ1000D1 Z1R 1978, KZ1000D3 Z1R 1980, KZ1000G1 LTD Classic 1980,

Description

Kawasaki Z1, KZ, EX
Steering Stem Bearing & Seal Kit
Models listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Kawasaki H1, H2, Z1
Race - Steering Stem
H1, H1A, H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S2, S2A, S3, S3A, KH400, Z1, Z1A, Z1B

Geniune Kawasaki part.
Made in Japan.

Description

Kawasaki Z1, KZ900
35T Rear Sprocket (standard)

1972-75 Z1, 1976 KZ900 A4 & A5 (not B1)

Made in Japan by Sunstar #2-641335

Description

Kawasaki H2, Z1
Lock Washer Set - Rear Sprocket
H2, Z1, KZ900A, KX450

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 3

Description

Kawasaki H2, Z1
Sprocket Hardware Set - Rear 9 piece set
1972-75 H2, 1972-75 Z1

Quality Reproduction made in Japan. Replaces OEM 92065-048 and 92065-072

Sold only as a set.

Description

Kawasaki H2, Z1, KZ900
Rear Wheel Dampers- Cush Drive
H2B/C 1974-75, Z1/A/B 1972-75, KZ900A4/A5 1976-77
Set of 6 rubber rear wheel dampers

Replaces OEM part 42014-021. Quality Reproduction

Description

Kawasaki Front Brake Rotor Lock Washer Set
H1B, H1D, H1E, H1F, H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Replaces OEM 92088-014

Sold only as a set

Description

Kawasaki H1, H2, Z1
Wheel Dust Cover Screws
Z1/A/B 1973-75, H1 1972-75, KH500 A8 1976, H2 1972-75

These screws hold the chrome dust cover on the front wheel. Set of 3

Replaces OEM part 23019-012 & 222E0508A

Description

Kawasaki KZ & ZN Tank Emblem Screws 3mm x 6
Z1 KZ1000 (except C & P police models) KZ1100 KZ1300 KZ200 KZ250 KZ305 KZ400 KZ440 KZ550 KZ650 KZ700 KZ750 KZ900 ZN1100 ZN1300 ZN700

Geniune Kawasaki part 92012-003 or 221C0306. Sold only as a set of 4.

Description

Kawasaki Front Brake Rotor Hex Bolt Set
H1B, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Replaces OEM 92001-104

Sold only as a set of 6 - 8 x 28mm stainless steel hex bolts

Description

Kawasaki Caliper Bolt Set
H1B, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B

10mm X 43mm bolts with 14mm hex head & washers

Set includes 2 bolts, 2 washers and 2 spring washers. Replaces OEM 43070-001, 461F1000 & 410B1000.

Description

Kawasaki Caliper Mount Bolt Set
H1B, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Sold only as a set. Includes 2 bolts, 2 washers and 2 spring washers

Replaces OEM 43070-001, 461F1000 & 410B1000. These bolts are zinc plated and have "8" on the face. OEM bolts were chrome with no "8".

Description

Kawasaki Z1, H2, H1
Clutch Lever Bolt - 8mm shoulder & 30mm long
Models Listed Below

Quality Reproduction. Replaces OEM 92007-020, 46059-011, 312B0500A

A1, A7, 1969-71 H1/A, 1972-75 H1C/D/E/F, H2 1972-75 H2/AB/C, 1973-73 S2/A, 1974-75 S3/A, 1972-75 S1/A/B/C & KH250, 1976 KS125/A, 1976-79 KE125A3-A6, 1974-75 KV100A7, 1976 KV75, 1976-80 KX450, 1974 KZ400/D/D3/D4, 1974-75 Z1
Please measure and compare dimensions. Some of the older Z1 clutch perches use 7mm.

Description

Kawasaki
Clutch Lever Pivot Bolt - 7mm shoulder & 22mm long
H1, H2, Z1 & other models

Quality Reproduction in stainless steel. Please measure and compare dimensions. Please measure and compare dimensions.

Description

Kawasaki
Brake or Clutch Lever Pivot Bolt
8mm shoulder & 26mm long
H1, H2, Z1 & other models

Quality Reproduction in stainless steel. Please measure and compare dimensions.

Description

Master Cylinder Lever Adjusting Bolt & Hardware
Models listed below

Master Cylinder Lever Adjuster Kit

Replaces OEM 43031-001, 311B0800 & 43030-003

Description

Kawasaki H1, H2, S, Z1, ZL, ZX, EX, EN
Master Cylinder Dust Boot
Models listed below

Quality Reproduction
Replaces OEM part 43069-002

Correct ribbed design for Z1, H2, H1

Description

Kawasaki Lock Nut 10mm
H1D/E/F, H2, KH500, S1, S2, S3, Z1, F11, Z250, KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ900, KZ1000, KZ1100, KZ1300, EX250, EX305, EX500

Use for muffler, footrests etc.

Geniune Kawasaki part. Also replaces OEM part 92019-021 & 92015-1429

Description

Kawasaki Domed Nut 8mm
H1/A/B/C/D/E/F, KH500A8, KZ1000(THRU 80), KZ900A4/A5/B1 Z1/A/B, KZ550A1-A4 KZ650, KZ750

Use for brake pedal, muffler, footrests etc.

Geniune Kawasaki part.

Description

Kawasaki H2, Z1, KZ
Indicator - Rear Brake
H2/A/B/C 1971-75, Z1/A/B 1972-75, KZ900A4/A5 1976-77 and possibly other models.

Quality Reproduction. Replaces OEM 41085-004

Description

Kawasaki H2, Z1, KZ
Indicator - Rear Brake
H2/A/B/C 1971-75, Z1/A/B 1972-75, KZ900A4/A5 1976-77 and possibly other models.

Genuine Kawasaki part.

Description

Kawasaki Brake Rod Pin
H1B, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, Z1, Z1A, Z1B, KZ900, KZ750, KZ550, KZ400, KZ305 & other models

Larger of the two Brake Rod Pins and for most bikes its at BACK end of the Rod.

Geniune Kawasaki part.

Description

Kawasaki Chain Adjuster Assembly Set
H2B, H2C, Z1, Z1A, Z1B, KZ900, KZ1000 (thru '80)

Geniune Kawasaki parts
33040-066, 315B1000 & 92001-143

This 10mm version replaces 8mm version originally installed on Z1 models.

Description

Kawasaki Chain Adjuster - 8mm Bolts & Nuts
H1, H2, S2, Z1, Z1A, Z1B, KZ900, KZ1000 (thru '80) and others

Quality Reproduction. Replaces 92001-038

Corrrect 8mm version originally installed on H1, H2 & Z1 models.

Description

Headlight Brackets - Universal Side Mount
One pair (2) chrome universal fit headlight ears for forks up to 36mm in diameter - two adjustment slots.

EMGO. Sold only as a set

Description

Headlight Shell Assembly - Black
Models listed below

Black shell (body), inner and outer chrome rings, mounting ring and all hardware. 7" headlight not included.

Replaces OEM 23005-1016 & 23005-1015-21

Description

Headlight Shell Assembly - Chrome
Models listed below

Chrome shell (body), inner and outer chrome rings, mounting ring and all hardware. 7" headlight not included.

Replaces OEM 23005-1016 & 23005-1015-21

$78 USD plus shipping
Contact us for shipping cost
parts@reproductiondecals.com

Emgo part EM66-65042

Description

Headlight Rim & Retainer
Models listed below

Inner and outer chrome rings, plus the mounting ring and all hardware. 7" headlight not included.

Replaces OEM 23006-038, 23072-001, 23074-001 & others

Description

Kawasaki Z1, KZ
Rear Wiring Harness - Tail Light
1973-75 Z1/A/B, 1976 KZ900A4/A5/B1, 1977-80 KZ1000A1/A2/A3/A4 KZ1000B1/B2/B3/B4

Runs through rear fender. For models with chrome steel rear fender.
Quality Reproduction of 26002-031.

Description

Kawasaki Z1 Tail Light Assembly
Z1, Z1A, Z1B

Compete unit includes bracket, wiring bulb & everything shown.

Replica of OEM 32109-1004

Description

Aftermarket Kawasaki Taillamp Lens

REPLACES PART# 23026-023

Quality aftermarket lens made by Emgo

H2B/C, S1A/B/C, S2A, S3/A, KH250A5, KH400A3-A5, Z1/A/B, G5/A/B/C, KE100A5-A10,

Description

Aftermarket Kawasaki Taillamp Lens for KZ models
Models listed below

Replaces Part #23026-034

Qualiy aftrmarket lens

KZ1000A1-A4 KZ1000B1-B4 1977-80, KZ1000C1-C4 1978-81, KZ100P1-P18 1982-98, KZ200A1-A2 1978-79, KZ400H1 1979, KZ440A1-A4 KZ440D1-D5 KZ440G1 1980-83, KZ550A1-A4 KZ550C1-C4 KZ550D1 1980-83 KZ650B1-B3 KZ650C1-C3 KZ650D1-D2 1977-79, KZ650E1 KZ650F1 KZ650H1-H3 1980-83, KZ750B1-B4 1976-79, KZ750G1 KZ750H1 KZ750H2 1980-83, KZ900A4-A5 KZ900B1 1976-77

Description

Kawasaki KZ, KH Turn Signal
Models listed below

Excellent quality replacement units from K&S - DOT approved to ensure good visibility and safety.

Replaces OEM 23040-054
Siingle wire. Single filament bulb

Description

Kawasaki H1, H2, Z1, KZ Turn Signal
Models listed below

Excellent quality replacement units from K&S - DOT approved to ensure good visibility and safety.

Replaces OEM 23040-034, 23040-029, 23037-034 & 23040-1005
Siingle wire. Single filament bulb

Description

Kawasaki Z1, KZ, H1 & H2 - Front Turn Signal Sockets
Changes single filament bulbs to double. Allows front turn signals to be used as running lights.

Replica of OEM 32109-1004

Description

Kawasaki Z1, KZ
Lead Wire - Turn Signal
Models listed below

Quality Reproduction. Replaces OEM 26011-063

1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD, 1978-80 KZ1000D Z1-R, 1977-80 KZ1000A1/A2/A3, 1977-80 KZ1000B LTD, 1979-80 KZ1000E shaft, 1980 KZ1000G Classic, 1981-82 KZ1000K LTD, 1981-82 KZ1000M CSR, 1979-81 KZ1300A, 1980-83 KZ750, 1980-83 KZ750 LTD, 1982 KZ750 CSR twin, 1983-84 KZ750K LTD belt, 1980 KZ750G LTD II, 1976-79 KZ750B, 1981-83 KZ650H CSR, 1980 KZ650F, 1980 KZ650E LTD, 1978-79 KZ650B & B2A, 1980-83 KZ440D LTD, 1980-81 KZ440B, 1980-83 KZ440A LTD, 1982 KZ440G, 1979 KZ400H, 1978 KZ400C, 1978-79 KZ400B, 1983 KZ305B CSR, 1981-82 KZ305A CSR, 1983 KZ250W LTD belt, 1982 KZ250L CSR belt, 1980-81 KZ250D CSR, 1973-75 MC1, 1974-75 MC1M, 1976-81 KM100

Description

Kawasaki Z1 Front/Rear Turn Signal Stems - 95mm Long Type
1973-1975 Z1, Z1A & Z1B

Replaces OEM 23078-001

Sold only in pairs.

Description

Kawasaki Z1 Front/Rear Turn Signal Stems - 30mm Short Type
1973-1975 Z1, Z1A & Z1B

Replaces OEM 23078-001

Sold only in pairs.

Description

Kawasaki KZ, GPz
FRONT Turn Signal
Models listed below

Excellent quality replacement units from K&S - DOT approved to ensure good visibility and safety.

Replaces OEM 23037-1103 and 23037-1131

Description

Kawasaki KZ, GPz
REAR Turn Signal
Models listed below

Excellent quality replacement units from K&S - DOT approved to ensure good visibility and safety.

Replaces OEM 23037-1104 and 23037-1132

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector (set of 2) - Red
H2/A, Z1/A/B, S2, S1 & others models

OEM part 28012-008 & 28001-009
Geniune Kawasaki part with correct STANLEY markings.
Made in Japan.

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector - Red
H2/A, Z1/A/B, S2, S1 & others models

OEM part 28012-008 & 28001-009
Geniune Kawasaki part with correct STANLEY markings.
Made in Japan.

Description

Kawasaki H2, Z1, S1, S2
Front Reflector (set of 2) - Amber
H2/A, Z1/A/B, S2, S1 & others models

OEM part 28012-009 & 28001-011
Geniune Kawasaki part with correct STANLEY markings.
Made in Japan.

Description

Kawasaki H2, Z1, S1, S2
Front Reflector - Amber
H2/A, Z1/A/B, S2, S1 & others models

OEM part 28012-009 & 28001-011
Geniune Kawasaki part with correct STANLEY markings.
Made in Japan.

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector (set of 2) - Red
H2/A, Z1/A/B, S2, S1 & other models

Replica reflectors with no Stanley markings. OEM part 28012-008 & 28001-009

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector - Red
H2/A, Z1/A/B, S2, S1 & other models

Replica reflector with no Stanley markings. OEM part 28012-008 & 28001-009

Description

Kawasaki H2, H1, KZ
Rear Reflector (set of 2) - Red with Chrome
H2, H1, KZ & other models

Replaces OEM part 28001-030. Quality Reproduction

Outer edge is chromed plastic.

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector - Red with Chrome
H2, H1, KZ & other models

Replaces OEM part 28001-030. Quality Reproduction

Outer edge is chromed plastic.

Description

Kawasaki H2, H1, KZ
Rear Reflector (set of 2) - Amber with Chrome
H2, H1, KZ & other models

Replaces OEM part 28001-019. Quality Reproduction

Outer edge is chromed plastic.

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector - Red with Chrome
H2, H1, KZ & other models

Replaces OEM part 28001-019. Quality Reproduction

Outer edge is chromed plastic.

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Kawasaki KZ Chrome Horn - Replica
Fits most models

Chrome 12 volt horn. Includes mounting bracket with pre-drilled hole.

Description

Kawasaki KZ Black Horn - Replica
Fits most models

Black 12 volt horn. Includes mounting bracket with pre-drilled hole.

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Kawasaki Z1 Chrome Replica Mirror
Includes long and short stems

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Chrome finish. Replaces OEM: 56002-021

Description

4" Universal Chrome Mirror
10mm screw-in with 8" stem
F its RH or LH side

Universal fit for many makes and models.
Designed as a CB750 K0 replica but will fit any 10mm right hand thread mount.

Description

Gauge Cover Set - Black Lower
Z1 1973-75, KZ900 1976, KZ1000 1977-80, KZ650 1977-80, KZ750 1976-79

Black tach and speedo gauge covers.

Description

Kawasaki Z1
Indicator Lamp Cover Set
1973 Z1

OEM replica made of plastic. Set includes upper & lower cover.

Description

Kawasaki Z1A & Z1B
Indicator Lamp Cover Set

OEM replica made of plastic. Set includes upper & lower cover.

1974 Z1A & 1975 Z1B

Description

Kawasaki Z1 & Z2
Lock Set - Ignition, Seat, Steering

Matched set of locks for the Kawasaki Z1. Includes 2 Kawasaki Keys, and Steering Lock Screw.

Quality Reproduction.

Description

Kawasaki H2, H1, KZ
Footrest Rubber - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Geniune Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki H2, H1, KZ
Footrest Bar - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Geniune Kawasaki part.
Made in Japan.

Sold indidiually
Used with 92076-024 rubber

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Genuine Kawasaki Shifter Rubber

PART# 13157-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki KZ
Shifter Rubber
KZ750-1100 models up to 1985

Aftermarket replacement

Description

Kawasaki H1, H2, Z1
Damper Rubber
H1D, H1E, H1F, KH500
H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 2

Description

Kawasaki H1, H2, Z1
Damper Rubber
H1D, H1E, H1F, KH500
H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Quality Reproduction made in Japan.
Replaces OEM 92075-084

Sold only as a set of 2

Description

Kawasaki Z1, KZ900, KZ1000
Rubber Tank Strap
Z1, Z1A, Z1B, KZ900 A4, KZ900 B1 LTD, KZ1000 A1/A2, KZ1000 B1/B2 LTD, KZ1000 D1 Z1-R

Quality Reproduction. Made in Japan. Replaces OEM 92072-042

Description

Kawasaki Z1, KZ900, KZ1000
Rubber Tank Strap
Z1, Z1A, Z1B, KZ900 A4, KZ900 B1 LTD, KZ1000 A1/A2, KZ1000 B1/B2 LTD, KZ1000 D1 Z1-R

Geniune Kawasaki part.
Made in Japan.

Rubber Strap only. Metal ends not included.

Description

Kawasaki Z1, KZ, ZX
Damper - Fuel Tank
Models listed below

Quality Reproduction made in Japan. Replaces OEM 92075-125

Sold only as a set of 2.

KZ1000 KZ1100 KZ400 KZ700 KZ750 KZ900 Z1 ZN1100B1-2 1984-85 ZN1300A1-6 1983-88 ZN700A1-2 1984-85 ZX1100B1-3 1988-90 ZX1100A1-21983-84 ZX600C1-10 1988-97 ZX750A1-3/E1-21983-85 ZX750F1-4 1987-90 ZX900A1-3 1984-86

Description

Kawasaki Z1, KZ
Damper Rubber Set - Fuel Tank
1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD, 1978-80 KZ1000D Z1-R, 1977-80 KZ1000A1/A2/A3, 1977-80 KZ1000B LTD

Quality reproduction 5 piece hardware kit. OEM 92075-084, 92075-125 & 92072-042

Description

Kawasaki KZ, KLT
Fuel Tank Damper
Models listed below

Geniune Kawasaki part 92075-295.

Description

Kawasaki KZ, KH & KX Dust Cover Set - Reproduction
KH500 1976, KZ650 thru 1980, KZ750B, KZ750G, KZ900, KZ1000 (thru 1980), KX250 74-79, KX400 75-76.

Sold only as a set of 2. Replaces OEM 44010-032.

$18 USD per set plus shipping
Contact us for shipping cost
parts@reproductiondecals.com
Limited quantities

Description

Kawasaki H1, H2, Z1
Fork Dust Cover
H1B, H1D, H1E, H1F
H2, H2A, H2B, H2C
Z1, Z1A, Z1B

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 2
Also replaces 44010-018

Description

Kawasaki H1, H2, Z1
Fork Dust Cover
H1B, H1D, H1E, H1F
H2, H2A, H2B, H2C
Z1, Z1A, Z1B

Quality Reproduction made in Japan.

Sold only as a set of 2
Replaces 44010-017 & 44010-014

Description

Kawasaki H1 H2, Z1
Fork Seal Stopper Set
H2/A/B/C 1971-75, Z1/A/B 1972-75 and possibly other models.

Replaces OEM: circlip 44044-012 & washer 44043-044

Description

Kawasaki Z1, H2, H1
Taillight Damper Rubber Set (set of 3)
Z1/A/B, H2/A/B/C, S1/A/B/C, KH250, S2/A, S3/A, KH400

Quality Reproduction made in Japan. OEM 92075-076

Description