Description

Suzuki T20, T500
Rear Shocks (set of 2)
Replaces OEM: 62100-11600

High qualilty replica of original OEM shocks. Measure 12" from eye mounts.

Also correct for T250, T305, T350, T500 '69-'75, TS250 '69-'70,

Description

Suzuki T350, GT380, GT550, GT750
Rear Shocks (set of 2)

High qualilty replica of original OEM shocks. Measure 11.75" from eye mounts.

1971-72 T350, 1972-77 GT750, 1972-77 GT550, 1972-77 GT380

Description

Suzuki T500
Complete Gasket Set
1971-75 T500R, J, K, L, M

Made in Japan to OEM specifications by Vesrah

Description

Suzuki T500 Stainless Steel Bolt Set
1968-1975 T500

Includes 21 bolts. Contains all visible bolts on lower engine covers.

Description

Suzuki T20, X6 Stainless Steel Bolt Set
1965-1969 T20

Includes 26 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki T250 Stainless Steel Bolt Set
1970-1972 T250

Includes 24 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki T Series (Kokusan)
Ignition Tune Up Kit
T500 1968-1975, T305 & TC305 1969, T350 1969-1972

Made in Japan to OEM specifications

Kit Includes:
2 - Sets of Contact Points
2 - Condensers

Description

Ignition Points

See application list below. More than one set of points may be required for models with 2 or more cylinders.

Made in Japan by Diachi

Kawasaki 1971 F81M, 1973 F11M, 1973-75 S1A/S1B/S1C, 1976 KH250A5, 1972-73 S2/S2A, 1974-75 S3/S3A
Suzuki 1969-70 T125II, 1971 T125R, 1970 T250II, 1971-72 T250R/J, 1969 T305, 1969 TC305, 1969-72 T3501/2/R/J, 1968-75 T5001/2/3/R/J/K/L/M

Description

Suzuki - Oil Inspection Lens Set
Assembly - Clear Lens
Models Listed Below

Used on many oil injected 2 stroke models from the 70s.

Genuine Suzuki part.

Description

Suzuki
Oil Inspection Lens Set
Used on most oil injected 2 stroke models from the 60s and 70s.

Models include T500, T20, T250, T305, T350, T125, K11P, K15P, MT50 and many more

Genuine Suzuki part.

Description

Suzuki T500
1967-1968 T500 Cobra
Correct suede-like vinyl

High quality reproduction seat cover. Pattern on seat is embossed (not stitched) for original appearance. Suzuki is printed on the back. Hand strap & studs included.

Description

Suzuki T500
1969 T500II

High quality reproduction seat cover. Pattern on seat is embossed (not stitched) for original appearance. Suzuki is printed on the back. Hand strap included.

Description

Suzuki T500
1970-1975 T500III/R/J/K/L/M

High quality reproduction seat cover. Pattern on seat is embossed (not stitched) for original appearance. Suzuki is printed on the back. Hand strap included.

Description

Suzuki T20 & TC250
1965-1968 X6 Hustler & X6 Scrambler

High quality reproduction seat cover. Pattern on seat is embossed (not stitched) for original appearance. Suzuki is printed on the back. Hand strap included.

Description

Suzuki T125 & T90
1969-1971 T125/R Stinger & T90 Wolf

High quality reproduction seat cover. Pattern on seat is embossed (not stitched) for original appearance. Suzuki is printed on the back. Hand strap included.

Description

Suzuki 1968 T500 Cobra
Seat Cover Studs
Replaces OEM: 45100-15000

Replica Cobra and Mk. II Seat Cover Studs. Polished stainless steel with 4mm metric threaded shaft - plastic washer and nut supplied.

Also used on other models.

Description

Suzuki T500, T20, GT Series, TM Series, MT50 & other models
Side Stand Spring

Geniune Suzuki part.
Made iin Japan.

Description

T500, T20, X6, TC250
Carburetor Cap (set of 2)
T500, T20 and others

Replaces OEM part 13681-11010
Quality Reproduction

Possibly fits other models

Description

Mikuni Carburetor Float
T20, X6 and possibly others
Standard on VM24-VM26 flange type carburetors

Geniune Mukuni part VM24/171. Made iin Japan.

Sold individually.

Description

Petcock
Suzuki T20, T250, T350
Kawasaki Z1, KZ900, A1, A7

2 fuel outlets at the back and ON, OFF & RESERVE settings.
22mm thread.

Fits Kawasaki Z1, KZ900, KZ1000C1, A1, A7 & Suzuki T20, T250, T350.
This replacement petcock is NOT a replica of the original.

Description

Petcock
Suzuki T20, T250, T350
Kawasaki Z1, KZ900, A1, A7

2 fuel outlets at the back and ON, OFF & RESERVE settings.
22mm thread.

Fits Kawasaki Z1, KZ900, KZ1000C1, A1, A7 & Suzuki T20, T250, T350.
This replacement petcock is NOT a replica of the original.

Description

Petcock
Suzuki T20, T250, T350
Kawasaki Z1, KZ900, A1, A7

2 fuel outlets at the back and ON, OFF & RESERVE settings.
22mm thread.

Fits Kawasaki Z1, KZ900, KZ1000C1, A1, A7 & Suzuki T20, T250, T350.
This replacement chrome petcock is NOT a replica of the original.

Description

Petcock - Custom Chome
Single Outlet 22mm thread nut - Right Side Spigot

Engineered to eliminate all internal O-rings. The innercore design insures against gas leakage while providing maximum flow. Features a filter screen, reserve setting, and chrome body. Left Side facing output nipple.

Description

Fuel Line T Connector 1/4"
For use on 1/4" I.D. fuel line.

Sold individually.

Description

Kawasaki H2, H1, S, KH, Z1, KZ
Petcock - Fuel Filter
H1/A/B/C/D/E/F KH, H2/A/B/C, S1A/B/C, KH250, S2/A, S3/A, KH400, Z1/A/B, KZ900 & many others

Filter fits on inlet tube and reserve. One petcock requires 2 filters. Sold individually.

Description

Cable Adjuster
Throttle & Choke adjuster for Mikuni VM carburetor

Miikuni part M21/14. Replaces OEM part 16002-002

Description

Cable Adjuster Set
Throttle & Choke adjuster set for Mikuni VM carburetor

Genuine Miikuni parts. Adjuster is brass and nut is zinc plated

Description

Fuel Filter - In Line
2" body for 1/4" fuel line

Sintered Bronze element. Slim line, see through design.

Description

Fork Seals
34 mm X 46 mm X 10.5 mm
Various models

OEM replacement

T250 69, T250II/R/J 70-72, TC250 69, T305 69, TC305 Scrambler 69, T350I/II/R/J 69-72, T5001/2/3 Titan, T500R/J/K/L/M Titan 71-75,

Description

Fork Seals
35 mm X 48 mm X 11 mm
Various models

OEM replacement

GT500A/B Titan 76-77

Description

Fork Seals
30 mm X 40.5 mm X 10.5 mm
Various models

OEM replacement. See application list below.

Kawasaki 1970-71 G31M/G31MA, 1970-71 G4TR/A, 1972-75 G4TRB/C/D/E, 1972-75 G5/G5A/G5B/G5C, 1976-81 KE100A5-A10, 1982-01 KE100B1-B20. 1976 KV100A7, 1969 C2SS/C2TR, 1971-73 F6/A/B, 1968-70 F3, 1971-75 F7/A/B/C/D
Suzuki 1970-72 TC90/R/J, 1970-72 TC90/R/J, 1965-67 B100, 1973-77 TC100K/L/M/A, 1973-77 TS100K/L/M/A, 1965-67 B105P, 1965-67 KT120, 1972-77 TC125J/K/L/M/A/B, 1971-77 TS125R/J/K/L/M/B, 1973-74 GT185K/L, 1974-77 TC185L/M/A/B, 1971-76 TS185R/J/K/L/M/A, 1977-78 TS185B/C, 1965-69 T200, 1965-69 TC200, 1976-78 RM100A/B/C, 1973-75 TM125K/L/M, 1978 DS100C
Yamaha 1988-90 DT50U/W/A, 1974-76 DT100A/B/C, 1969 AT1E/AT1M/AT1MB, 1970-73 AT1B/AT1C/AT2/AT3, 1970-73 AT1MX/AT2M/AT2MX, 1974-76 DT125A/B/C, 1980 TZ125G, 1969-71 CT1/B/C, 1972-73 CT2/CT3, 19774-6 DT175A/B/C, 1970-71 CS3C/CS3B, 1972 CS5, 1974-75 RD200A/B/C, 1974-75 MX100A/B, 1974-75 MX125A/B, 2000-04 TTR125M/MC/N/P/R/S, 2003-06 TTR125ER/ES/ET/EV, 2003-06 TTR125LER/LES/LET/LEV, 2000 TTR125LWM, 2001-06 TTR125LN/LPC/LR/LS/LT/LV, 1974-75 YZ125A/B, 1974-75 MX175A/B, 1975-76 TY175B/C

Description

Suzuki
Steering Stem Bearing & Seal Kit
Models listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Suzuki GT & RE5 Front Brake Pads - Vesrah
1973-1977 GT750K-B
1976-1977 GT550A/B
1977-1978 GT500AH/BJ
1972-1977 GT380J-B
1972-1977 GT250K-B
1975-1976 RE5M/A

OEM replacement by Vesrah

Description

Brake Bleeder Rubber Cap

Fits most caliper bleed nipples.

Description

Brake Banjo Bolt Set
Stainless Steel Bolts

Includes:
2 - Stainless steel bolts
4 - Crush washers

Description

Brake Hose 3/8" Crush Washers
Package of 10

Goodridge Brake Hose 3/8" Crush Washers (10 pack)

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Compact Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Compact Horn: Black 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Black 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

Suzuki 1968 T500 Cobra
Rubber Knee Pads (set of 2)

High qualilty replica of original OEM fuel tank knee grip rubbers.

Sold only as a set.

Description

Suzuki T500 & GT500
Footpeg Rubber (set of 2)
Replaces OEM: 43550-16400

High qualilty replica of original OEM footpeg rubbers.

Sold only as a set.

Description

Suzuki 1968 T500 Cobra
Hand Grip Set

Cobra handlebar rubbers, 100% accurate replicas made in high quality rubber.

Sold only as a set.

Description

Suzuki 1968-1973 T500
Gray Speedometer Cable

Fits the following models:
1968 T500 Cobra
1970 T500II
1971 T500III
1971 T500R
1972 T500J
1973 T500K
1969-1970 TS250

Description

Suzuki 1968-1973 T500
Gray Tachometer Cable

Fits the following models:
1968 T500 Cobra
1970 T500II
1971 T500III
1971 T500R
1972 T500J
1973 T500K
1969-1970 TS250

Description

Suzuki 1968 T500 Cobra
Grab Rail
Replaces OEM: 94710-15001

T500 Cobra Grab Rail Replica - made from slightly heavier gauge steel tube (originals were prone to breaking at the rear mount points).

Image of actual grab rail on our T500 Cobra.

Description

Suzuki T and GT Series & other models
Cable Clamp

Used to hold speedo & front brake cables on drum brake models.

Geniune Suzuki part.
Made iin Japan.

Description

NGK Spark Plug Cover
LZFH - Non Resistor Type

Thread Sizes: 10mm, 12mm& 14mm
Resistance: None
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LD05F

Thread Sizes: 10mm & 12mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LB05FP

Thread Sizes: 14mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Special waterproof cover

Description

NGK Spark Plug Resistor Cover
LB01EP

Thread Sizes: 14mm
Resistance: 1 ohm
Configuration: 90 degree elbow
For terminal nut or integrated terminal. Special waterproof cover.

Description

NGK Spark Plug Wire Splicer

Used for splicing new wires on old coils. Joins two sections of plug wire together.

Made from high impact plastic to provide a watertight connection.

Description

Handlebar 7/8" Chrome - European Bar

Width: 29.5"
Rise: 2"
Pullback: 5.5"
Center Width: 4.5"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Handlebar 7/8" Chrome - Superbike Bar

Width: 29"
Rise: 2.5"
Pullback: 4.75"
Center Width: 4.75"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

$24.99 USD plus shipping
Contact us for shipping cost
parts@reproductiondecals.com

Description

Handlebar 7/8" Chrome - Drag Bar

Width: 27.5"
Rise: 0"
Pullback: 3.75"
Center Width: 8"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

4" Universal Chrome Mirror
10mm screw-in with 8" stem
Fits RH or LH side

Universal fit for many makes and models.
Designed as a CB750 K0 replica but will fit any 10mm right hand thread mount.

Description

Kawasaki Z1 Chrome Replica Mirror
Includes long and short stems

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Chrome finish. Replaces OEM: 56002-021

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Air Filter - K&N
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

#RC-1070
Made in USA.

Description

Air Filter - S&B
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

Made in USA

SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S

Description

Air Filter - S&B
Individual 52.8mm Pod
Models listed below

52.8mm internal diameter
89mm filter outside diameter
102mm filter length
15mm flange length

Made in USA

SUZUKI GT750 All, 1986-88 GSX R1100, 1988-89 GSX1100 Katana, 1985-87 GSX-R750, 1986-87 GSX600 Katana, 1977-83 GS450/GS425/GS400

Description

Air Filter - Emgo
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

Description

Uni Filter - Pod Filters
Individual 43-46mm Pod

43-46mm internal diameter

Sold only as a set of 2

Description

Uni Filter - Pod Filters
Individual 35-38mm Pod

35-38mm internal diameter

Sold only as a set of 2

Description

Steering Damper
Custom brackets must be made for universal fit.

Identical to original Kawasaki steering Damper 46117-006. Variable force, oil-filled hydraulic steering damper. Seven-point adjustment range. Brackets are not included.

Quality Reproduction made in Japan by RC Engineering.

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Sudco - Mikuni Tuning Manual

This 92 page manual includes exploded views, listings & optional parts. Guides you through tuning and troubleshooting the popular lines of Mikuni Carburetors.

Description

Spoke Wrench Set

2 piece set fits all 8, 9, 10, and 11 gauge spoke nipples.

Description

Spring Hook (puller)
Use to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts.

Made in USA by Motion Pro

Description

Silicone Liquid Gasket TB1194
Semi drying synthetic liquid gasket which is resistant to oil, water, gasoline and chemicals. Use TB1194 to seal transmission case covers, 2-stroke cases, engine covers and much more. 40 F to 302 F. Note: replaces TB1104
3.5 oz (100g)

Description

Silicone Liquid Gasket TB1211
White free flowing RTV silicone. TB1211 is recommended for sealing flange surfaces and screw setions to prevent oil, water, gasoline and chemical leaks.Tack free in 90 minutes and fully cured in 24 hours.
3.5 oz (100g)