Description

Suzuki T350, GT380, GT550, GT750
Rear Shocks (set of 2)

High qualilty replica of original OEM shocks. Measure 11.75" from eye mounts.

1971-72 T350, 1972-77 GT750, 1972-77 GT550, 1972-77 GT380

Description

Suzuki GT750J & GT750K
Large Exhaust Cones (set of 2)
Upper LH & RH pipes

High qualilty replica of original OEM cones that looks and fits exactly like the originals.

Sold only as a set.

Description

Suzuki GT380 Carburetor Rebuild Kit
1974-77 GT380

Made in Japan to OEM specifications

Kit contains all necessary parts to rebuild one OEM carburetor.

Description

Suzuki GT380 & GT550
Mikuni Carburetor Float
GT380J/K/L/M/A/B 72-77, GT550J/K/L/M/A/B 72-77

Geniune Mukuni part. Made iin Japan.

Sold individually.

Description

Cable Adjuster
Throttle & Choke adjuster for Mikuni VM carburetor

Miikuni part M21/14. Replaces OEM part 16002-002

Description

Cable Adjuster Set
Throttle & Choke adjuster set for Mikuni VM carburetor

Genuine Miikuni parts. Adjuster is brass and nut is zinc plated

Description

Float Chamber Screws (set of 12)
GT750, GT550, GT380

Phillips Carburetor Float Bowl Screws 4x16 Zinc Coated. Enough screws for all 3 carburetors.
Used on many Mikuni VM carbs

Description

Fuel Filter - In Line
2" body for 1/4" fuel line

Sintered Bronze element. Slim line, see through design.

Description

Kawasaki H2, H1, S, KH, Z1, KZ
Petcock - Fuel Filter
H1/A/B/C/D/E/F KH, H2/A/B/C, S1A/B/C, KH250, S2/A, S3/A, KH400, Z1/A/B, KZ900 & many others

Filter fits on inlet tube and reserve. One petcock requires 2 filters. Sold individually.

Description

Fuel Line T Connector 1/4"
For use on 1/4" I.D. fuel line.

Sold individually.

Description

Suzuki
Oil Inspection Lens Set
Used on most oil injected 2 stroke models from the 60s and 70s.

Models include T500, T20, T250, T305, T350, T125, K11P, K15P, MT50 and many more

Genuine Suzuki part.

Description

Air Filter - K&N
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

#RC-1070
Made in USA.

KAWASAKI 1969-75 H1/A/B/C/D/E/F, 1976 KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S
YAMAHA 1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1984-85 RZ350
HONDA 1976-78 CB750 A Hondamatic, 1976-78 CB750 F Supersport, 1976-78 CB750 K Four

Description

Air Filter - S&B
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S

Description

Air Filter - Emgo
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

KAWASAKI 1969-75 H1/A/B/C/D/E/F, 1976 KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S
YAMAHA 1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1984-85 RZ350
HONDA 1976-78 CB750 A Hondamatic, 1976-78 CB750 F Supersport, 1976-78 CB750 K Four

Description

Uni Filter - Pod Filters
Individual 43-46mm Pod

43-46mm internal diameter

Sold only as a set of 2

Description

Uni Filter - Pod Filters
Individual 35-38mm Pod

35-38mm internal diameter

Sold only as a set of 2

Description

Suzuki GT380 Sebring
Complete Gasket Set
1972-77 GT380J, K, L, M, A, B

Made in Japan to OEM specifications

Description

Suzuki GT550J Stainless Steel Bolt Set
1972 GT550J

Includes 35 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki GT550 Stainless Steel Bolt Set
1973-77 GT550K/L/M/A/B

Includes 35 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki GT750J Stainless Steel Bolt Set
1972 GT750J

Includes 42 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki GT750 Stainless Steel Bolt Set
1973-77 GT750K/L/M/A/B

Includes 40 bolts. Contains visible bolts on lower engine covers.

Description

Suzuki T500, T20, GT Series, TM Series, MT50 & other models
Side Stand Spring

Geniune Suzuki part.
Made iin Japan.

Description

Suzuki T and GT Series & other models
Cable Clamp

Used to hold speedo & front brake cables on drum brake models.

Geniune Suzuki part.
Made iin Japan.

Description

Fork Seals
35 mm X 48 mm X 11 mm
Various models

OEM replacement

GT550J/K/L/M/A/B Indy 72-77, GT750J/K/L/M/A/B Lemans 72-77

Description

Suzuki
Steering Stem Bearing & Seal Kit
Models listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Brake Bleeder Rubber Cap

Fits most caliper bleed nipples.

Description

Brake Banjo Bolt Set
Stainless Steel Bolts

Includes:
2 - Stainless steel bolts
4 - Crush washers

Description

Brake Hose 3/8" Crush Washers
Package of 10

Goodridge Brake Hose 3/8" Crush Washers (10 pack)

Description

Suzuki GT & RE5 Front Brake Pads - Vesrah
1973-1977 GT750K-B
1976-1977 GT550A/B
1977-1978 GT500AH/BJ
1972-1977 GT380J-B
1972-1977 GT250K-B
1975-1976 RE5M/A

OEM replacement by Vesrah

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Compact Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Compact Horn: Black 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Black 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

NGK Spark Plug Cover
LZFH - Non Resistor Type

Thread Sizes: 10mm, 12mm& 14mm
Resistance: None
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LD05F

Thread Sizes: 10mm & 12mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LB05FP

Thread Sizes: 14mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Special waterproof cover

Description

NGK Spark Plug Resistor Cover
LB01EP

Thread Sizes: 14mm
Resistance: 1 ohm
Configuration: 90 degree elbow
For terminal nut or integrated terminal. Special waterproof cover.

Description

NGK Spark Plug Wire Splicer

Used for splicing new wires on old coils. Joins two sections of plug wire together.

Made from high impact plastic to provide a watertight connection.

Description

Handlebar 7/8" Chrome - European Bar

Width: 29.5"
Rise: 2"
Pullback: 5.5"
Center Width: 4.5"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Handlebar 7/8" Chrome - Drag Bar

Width: 27.5"
Rise: 0"
Pullback: 3.75"
Center Width: 8"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Steering Damper
Custom brackets must be made for universal fit.

Identical to original Kawasaki steering Damper 46117-006. Variable force, oil-filled hydraulic steering damper. Seven-point adjustment range. Brackets are not included.

Quality Reproduction made in Japan by RC Engineering.

Description

4" Universal Chrome Mirror
10mm screw-in with 8" stem
Fits RH or LH side

Universal fit for many makes and models.
Designed as a CB750 K0 replica but will fit any 10mm right hand thread mount.

Description

Kawasaki Z1 Chrome Replica Mirror
Includes long and short stems

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Chrome finish. Replaces OEM: 56002-021

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Sudco - Mikuni Tuning Manual

This 92 page manual includes exploded views, listings & optional parts. Guides you through tuning and troubleshooting the popular lines of Mikuni Carburetors.

Description

Spoke Wrench Set

2 piece set fits all 8, 9, 10, and 11 gauge spoke nipples.

Description

Spring Hook (puller)
Use to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts.

Made in USA by Motion Pro

Description

Silicone Liquid Gasket TB1194
Semi drying synthetic liquid gasket which is resistant to oil, water, gasoline and chemicals. Use TB1194 to seal transmission case covers, 2-stroke cases, engine covers and much more. 40 F to 302 F. Note: replaces TB1104
3.5 oz (100g)

Description

Silicone Liquid Gasket TB1211
White free flowing RTV silicone. TB1211 is recommended for sealing flange surfaces and screw setions to prevent oil, water, gasoline and chemical leaks.Tack free in 90 minutes and fully cured in 24 hours.
3.5 oz (100g)