Description

Kawasaki 1973 H2A
Side Panel Badge

Chrome/Black/White

Description

Kawasaki H2, S2, F6, F7
Rubber Tank Strap
'72-'73 H2/A, '72-'73 S2/A, '71 F7, '71-'73 F6/A/B

Replaces OEM part 92072-029
Quality Reproduction

Description

Kawasaki
Hand Grip Set
H1B/D/E/F, H2/A/B/C, S1/A/B/C, S2/A, S3/A, KH250, KH400, KZ400 Z1, F5, F6, F7, F8, F9, G3, G4

Geniune Kawasaki part.
Made in Japan.

OEM part numbers 46061-012 & 46075-017

Description

Kawasaki H2
Complete Gasket Set
1972-75 H2/A/B/C

Made in Japan to OEM specifications

Description

Kawasaki H1 & H2
Muffler Connector - Set of 3
H1, H1A, H1B, H1C & ALL H2

Replaces OEM part 18043-010
Quality Reproduction

For H1, H1A, H1B, H1C & ALL H2 models

Description

Kawasaki H1, H2, A1 & A7
Exhaust Clamp Set
H1, H1A, H1C, H2, H2A, A1 & A7

Replaces OEM part 18044-005
Quality Reproduction

Sold only as a set of 3.

Description

Genuine Kawasaki Shifter Rubber

PART# 13157-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki H1 & H2
Side Cver Protector (set of 2)
1972 H2 & 1973 H2A (4 req.)
1969 H1, 1970 H1, 1971 H1A, 1972 H1B & H1C

Geniune Kawasaki part.
Made in Japan.

Sold as a set of 2

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Kawasaki H2
Speedometer Cable
1972-73

Made in Japan to OEM specifications

Description

Kawasaki H2
Tachometer Cable
1972-75

Made in Japan to OEM specifications

Description

Kawasaki H2
Clutch Cable
1972-75

Made in Japan to OEM specifications

Description

Kawasaki H2
Throttle Cable
1972-75

Made in Japan to OEM specifications

Description

Kawasaki H2
Choke Cable
1972-73

Made in Japan to OEM specifications

Description

Kawasaki H1
Tachometer Cable Grommet

Quality Reproduction

H1B, H1C, H1D, H1E, H1F, KH500

Description

Kawasaki H2
Complete 4 Piece Crank Seal Set
1972-75 H2/A/B/C

Made in Japan to OEM specifications

Kit contains all necessary seals for one crankshaft rebuild.

Description

Kawasaki H2
Complete Engine Oil Seal Kit
1972-75 H2/A/B/C

Made in Japan to OEM specifications

Kit contains all necessary seals for one engine rebuild. Including right & left crankshaft end seals.

Description

Kawasaki H2
Complete Engine & Crank Seal Set
1972-75 H2/A/B/C

Made in Japan to OEM specifications

Kit contains all necessary engine seals and all crank seals.

Description

Kawasaki H2
Carburetor Rebuild Kit
1972-73 H2/A

Made in Japan to OEM specifications

Kit contains all necessary parts to rebuild one OEM carburetor.
Includes choice of 35 & 40 pilot jets and 100 & 105 main jets.

Description

Kawasaki H2, H1, A7,
Mikuni Carburetor Float
1972-75 H2, 1969-75 H1, 1976 KH500, 1966-71 A7, 1970-71 A7SS

Geniune Mukuni part. Made iin Japan.

Sold individually.

Description

Kawasaki H2 Kit
Mikuni TM32 Flat Slide Carbs, K&N Filters & Rubber Flanges

Kit contains:
3 - Mukini TM32 Flat Slide Carbs
3 - K&N Air Filters
3 - Rubber Flanges

Does NOT include extra jets

Description

Kawasaki H2 Kit
Mikuni TM34 Flat Slide Carbs, K&N Filters & Rubber Flanges

Kit contains:
3 - Mukini TM34 Flat Slide Carbs
3 - K&N Air Filters
3 - Rubber Flanges

Does NOT include extra jets

Description

Kawasaki H2 750 Piston Kit
Sizes from 71mm to 72mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H2 750 Piston Kit
Sizes from 72.5mm to 73.5mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H2
Small End Bearing
1972-1975 H2

Replaces OEM part 13033-027

For use on OEM or Wiseco pistons. One bearing required for each piston.

Description

Kawasaki H2
Piston Ring Set - 0.50 (020")
1972-1975 H2

Replaces OEM part 13025-045
Made in Japan to OEM specifications

For use on OEM pistons. Each set includes rings for ONE piston.

Description

Kawasaki H2 Connecting Rod Kit
1972-1975 H2

Kit includes connecting rod, crank pin bearing, crank pin and thrust washers.

Rod kits sold individually. Made in Japan to OEM specifications by Vesrah.

Description

Kawasaki H2
Big End Bearing
1972-1975 H2

For use on OEM or Vesrah rods. One bearing required for each connecting rod.

Description

Kawasaki
Master Cylinder Rebuild Kit
H2/A/B/C, H1B, H1D/E/F, KH500, KZ650B1, Z1/A/B, KZ900A4/A5, KZ400A1, KZ400A1/A2, KZ400/D/D3/D4, KH400A3/A4, S3/S3A, S2/S2A

Contains all components to rebuild one OEM master cylinder. Made in Japan.

Description

Kawasaki
Steering Stem Bearing Set
Various models - listed below

Upper: 30 x 48 x 14mm
Lower: 30 x 48 x 12mm

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Kawasaki H2, H1, KZ, S
Steering Stem Bolt & Washer
H1D, H1E, H1F, KH500, H2, H2B, H2C, S1C, KH250, S3, S3A, KH400, KZ1300, KZ1000, Z1, KZ400, KZ550, KZ750 & several other models

Geniune Kawasaki part.
Made in Japan.
Sold only as a set

Description

Kawasaki H2
Replica Handlebars
1972-75 H2/A/B/C

Replica of the stock handlebars

Description

Kawasaki H2, Z1, KZ
Spoke & Nipple Kit - Rear
1972-75 H2/A/B/C
1973-76 Z1/A/B
1976-77 KZ900A4/A5

OEM replacement

Description

Kawasaki H1, H2, Z1, KZ
Spoke & Nipple Kit - Front

1972-75 H1B/C/D/E/F
1972-75 H2/A/B/C
1973-76 Z1/A/B
1976-77 KZ900A4/A5

OEM replacement

Description

Kawasaki Clutch & Brake Lever Set
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacements

Description

Kawasaki Clutch Lever
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacement

Description

Kawasaki Front Brake Lever
Z1/A/B, KZ900A4/A5, KZ1000A1, KZ1000B1/B2 LTD, KZ750B1/B2, KZ650, KZ400, H1D/E/F, H2/A/B/C, S3/A, KH400A3/A4/A5

OEM replacement

Description

Kawasaki Z1 & H2 Front Brake Pads - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

Description

Kawasaki Z1 & H2 Rear Brake Shoes - Vesrah
1973-1975 Z1, Z1A & Z1B
1972-1975 H2, H2A, H2B & H2C

OEM replacement by Vesrah

H2A 1973
Gauge Faces (decal)
$24 US pr.
#KH2G-73-000G

Not sold separately

Applied over original gauge face. Disassembly of speedometer and tachometer is required. All openings and mounting holes are pre cut to simplify application.

For best results, sanding and repainting original gauge faces black is recommended prior to application of these decals.

H2
High Tension Wire Label Set (3 piece set)
$16 US per set
#KH2-RCL-750
228 mm (8.5") lengths

For use on left, center and right wires.

Printed on chrome-like material

Denco Cobra
Cylinder Head Decals
$14 US pr.
#DNC-00-003

Denco Cobra cylinder
head decals are not
available with serial
numbers.

Printed on a material
that simulates brushed
aluminum.

Side covers have cast emblems.
Click here for various small decals for the H2.

To order any items on this page, please go to our order page for more details.